3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? metpak ? hm header 2 mm type b11, 55/77 contacts , 5 rows, straight hm series physical performance environmental insulation material: high temperature th ermoplastic (lcp) flammability: ul 94v-0 contact material: copper alloy plating: see ordering information marking: 3m logo, part number, revision, date code mechanical normal force (nominal): 0.57 n [ 58 g ] signal engagement force (nominal): 0.32 n [ 33 g ] signal separation force (nominal): 0.20 n [ 20 g ] signal wipe (nominal, shortest contact): 2.67 mm [ 0.105 in. ] signal durability: 250 cycles with tr40b plating (lubricated) application: this module is not suitable for stand-alone use. electrical current rating (fully loaded): 1 a at 70 c signal insulation resistance: 1 x 10 4 m at 100 v dc withstanding voltage: 750 v rms temperature rating: -55 c to +125 c process rating: maximum 260c (per j-std-020c) moisture sensitivity level: 1 (per j-std-020c) ts-2068-02 sheet 1 of 3 date modified: april 5, 2007 ? modular/scalable format iec 61076-4-101 ? press-fit or solder tail version ? 63 mated lines per linear inch ? ships with protective cap, which also serves as an insertion tool ? end-to-end stackable with 5 row 3m? metpak? cp2, hm and hshm products ? see regulatory information appendix (ria) for chemical comp liance information ul file no.: e68080 metpak is a trademark of 3m company.
3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 row f row e row d row c row b row a row z 1234567891011 this view shown with protective cap* * cap to be removed after press-fit installation process signal contacts dim a = pin mating length dim b = pin tail length ground contacts hm-hxxxxx-5xxx-xxxxx rev x xxyy 15.15 .596 a b 2.00 .079 2.00 .079 c l 1.50 .059 4.50 .177 13.40 .528 5.00 .197 15.40 .606 12.00 .472 21.85 .860 20.00 .787 3m ? metpak ? hm header 2 mm type b11, 55/77 co ntacts, 5 rows, straight ordering information hm - h077b2 - 5bx1 - xxxxx hm - h055b1 - 5cx1 - xxxxx (rows f and z loaded 8.3 mm mate length) tail style: p = press-fit tail s = solder tail standard configuration dim a = 5.3 mm for rows a through e dim b = 4.4 mm for non-standard configurations contact sales representative (rows f and z not loaded) ts-2068-02 sheet 2 of 3 hm series plating options: (see plating chart) 0 0.0 0.00 mm 3 0.3 0.13 mm [inch] tolerance unless noted [ ] dimensions for reference only
3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? metpak ? hm header 2 mm type b11, 55/77 contacts, 5 rows, straight hm series ts-2068-02 sheet 3 of 3 finished ho le dia. "d" c u thic kness snpb thic kness drilled ho le dia. 0.550-0.650 [.0217-.0256] 0.025-0.045 [.0010-.0018] 0.008-0.018 [.0003-.0007] 0.686-0.727 [.0270-.0286] hole plating table plating suffix press-fit terminations solder tail terminations tg30 (ria e2 & c2 apply) (ria e3 & c2 apply) tr40b (ria e2 & c2 apply) (ria e3 & c2 apply) plating composition 0.76 m [30 "] min. au contact area 2.54 m [100 "] min. snpb tail area 1.27 m [50 "] min. ni all over 0.127 m [5 "] min. hard au over 1.02 m [40 "] min. pd/ni over 0.10 m [4 "] min. pd strike contact area 2.54 m [100"] min snpb terminal area 1.27 m [50 "] min. ni all over (lubricated contact area)
regulatory information appendix 3m electronic solutions division/interconnect europe appendix e1: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product is rohs compliant 2005/95/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e2: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec this product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/747/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e3: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment as amended by commission decision 2005/618/ec. this product contains lead in the solder tail area in excess of the maximum concentration value allowed. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e4: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains decabde in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/17/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. ria-2217-b
china appendix c1: china rohs electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix c2: china rohs 2 0 electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. the numerical reference in the symbol above should not be construed as a representation regarding the products life or an extension of a product warranty. the product warranty is stated below. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the product warranty stated below. important notice all statements, technical information, and recommendations related to 3ms products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. before using this product, you must evaluate it and determine if it is suitable for your intended application. you assume all risks and liability associated with such use. any statements related to the product which are not contained in 3ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3m. warranty; limited remedy; limited liability. this product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3m makes no other warranties including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. if this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3ms option, to replace or repair the 3m product or refund the purchase price of the 3m product. except where prohibited by law, 3m will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3m product, regardless of the legal theory asserted. 3 electronic solutions division 6801 river place blvd. austin, tx 78726-9000 800/225-5373 www.3m.com/interconnects ria-2217-b ? 3m 2007 name and content of hazardous substances or elements
|
